Menu
Your doggo will feel the LOVE with the beautiful leather collar lined with soft suede, not to mention your hands will thank you when holding the soft leash handle on a walk!
The bow tie has elastic loops at the back to allow for easy application going on and off in seconds whilst using quality parts to ensure it sits up for the world to see and avoids the dreaded sag you might experience will cheaper imports.
If you wish to personalize the bow tie with your dogs name and/or maybe a Swarovski crystal, add the bow, leash and collar to cart individually through their product listings. This will allow you to personalize the pups bow and once all items are added to cart it will automatically apply the same 10% discount..
Both leads have a length of approx. 1.2m. This is from the handle to tip of trigger hook.
The width you can select 15mm for smaller dogs or 18mm for larger breeds. Both are very strong.
Do not let the dogs go in water with leash. Exposure to water can cause rusting and also damage the leather. You wouldn’t go for a swim with leather shoes on now would you!
Also note the backing suede is not colour fast, it will bleed some of the colour if it gets wet.
The high quality leather used is from the Netherlands. This genuine leather has an elegant, soft and smooth finish.
*Colours may vary slightly in person to the appearance of photos online
For any other questions please contact us at info@swankypaws.com.au
Our Dog Collars come in 6 Sizes as follows-
XS- 30cm Long x 1cm Wide (Fits 21.5-27.5cm)(This size is 2mm thick & without suede backing)
S- 35cm Long x 1.5cm Wide (Fits 24.5-30.5cm)
M- 40cm Long x 1.5cm Wide (Fits 28-36cm)
L- 45cm Long x 1.8cm Wide (Fits 32.5-40.5cm)
XL- 55cm Long x 2.5cm Wide (Fits 39-47.5cm)
2XL- 65cm Long x 3cm Wide (Fits 49-59cm)
All collars are approx. 3mm thick
For more size info and diagram click on “Size Info” at the top of page below price.
Take off the collar before letting dogs go in water. This is to stop the buckles from rusting and also protect the leather. You wouldn’t go for a swim with leather shoes on now would you!
Also note the backing suede is not colour fast, it will bleed some of the colour if it gets wet.
The high quality leather used is from the Netherlands. This genuine leather has an elegant, soft and smooth finish.
Any bow or sailor bow purchased from Swanky Paws will perfectly on these collars. The elastic we use will stretch to fit the collar.
*Colours may vary slightly in person to the appearance of photos online
For any other questions please contact us at info@swankypaws.com.au
We sell our Sailor Bows in 4 Sizes as follows-
Small- 9.5cm wide x 11.5cm
Medium- 11.5cm wide x 13.5cm
Large- 14.5cm wide x 15.5cm
Extra Large/Jumbo- 19.5cm x 19.5cm
All hand made with love so ever so small variances are to be expected.
Simply pull the dog collar through the elastic loops at rear of bow tie and your bow will sit up for the world to see.
Your bow is hardier than you think! Best to stay on the side of caution though. Hand wash in cold or warm water, gentle soap is ok. Allow to dry laying flat out of sunlight. Do not iron, place in dryer, bleach, drycleaner or use any chemicals to clean other than spot tested gentle soap.
As with all dog products its important to always take care. Click Here for recommended safety tips.
*Colours may vary slightly in person to the appearance of photos online
For any other questions please contact us at info@swankypaws.com.au
Personalise your dogs bow with their name and/or a genuine Swarovski Crystal!
Simply tick the box of optional extras you want and your bow will arrive personalised just the way you like.
The name is added in a rose gold vinyl to the bottom right corner of the bow and the Swarovski Crystal on the left.
Both the vinyl name and Swarovski crystal are done in a very strong permanent adhesive.
Our tags go through a very unique process that prints the design on the tag with special printers and extreme heat. Once finished it creates a permanent design.
Every tag has the option of single or double side printing.
Single Side tags will add the dogs name entered in the text box to the front side of the tag with “Swanky Paws” on the backside.
To add a backside with phone number and or address etc simply check the “Print Back Side” box at the top of the page. Then fill in the text boxes with desired info.
Add anything you like within 14 characters and up to 4 lines.
If you leave a line blank, it will leave it blank when printed and the gap between the lines will be evened out.
If you buy a collar with the tag, we will automatically attach it for you. If bought individually, the triangle jump ring will be included loose in the packaging of the tag.
Attach-
Detach-
These tags are great for day to day use and to get maximum life out of them and avoid scratching/chipping please avoid-
To reduce fading don’t leave the tag in direct sunlight for long periods of time.
Did you know it’s actually a legal requirement for dogs outside of the home to have id tags in Australia?
If you go with the double sided tag you can add contact details. This will be invaluable if your dog escapes and can help avoid being lost or being taken to the pound.
